gammasupp

GAMMALINK FAX BOARDS

CD / Driver installation

1.	Insert the CD in the CD-ROM.
2.	Now click Install Software then select NEXT.
3.	Click YES and select TYPICAL.
4.	When it asks 'send test fax now' say NO.
5.	Click FINISH.

Installation of the board :

Switch OFF the PC.
Carefully insert the board in the slot and insert the telephone lines in the jacks of the board.
Switch ON the PC. Click Start -> Programs -> Gammalink -> Configure Gammalink Boards
Now click 'Auto Detect'.

Send a Test FAX
Click Start ==> Programs ==> Gammalink ==> Send FAX Applet
The following screen will appear :

Click on SHOW REG.

Fill the form and click OK.

Now click on Service (on the small Red, Yellow & Green dots, one below the other) and you will see the message Service: Started.

Type the FAX number (of a near by fax machine) and also select the FAX channel (1 or 2 or 3 or 4).

Type the file name you want to be sent.

Now click SEND FAX.

If you receive the fax from the near-by FAX machine it means that the board has been properly installed and it is also working properly.

Office :F2 Everest, 7th Flr, Tardeo Rd,Mumbai 400 034. Tel. : +91-22-2352 0968, 5660 3222, 2352 2050 Fax.: +91-22-2351 6881
E-mail : dialogic@foremost-systems.com